ABSTRACT
PURPOSE: To evaluate the effect of different printing orientations and post-polymerization time with thermal cycling on the translucency of 3D-printed denture base resins. METHODS: Heat-polymerized (HP) acrylic resin specimens were fabricated and 3D-printed denture base materials (NextDent, ASIGA, FormLabs) were printed with different printing orientations (0, 45, 90 degrees) and subjected to different post-polymerization times (15-, 30-, 60-, and 90-min). All specimens were polished and immersed in distilled water for 1 day at 37°C. CIEDE2000 was used to measure the translucency parameters (TP00) before and after thermal cycling (5000 cycles) recording the color parameters (L*, a*, b*) against a black and white background using a spectrophotometer. k-factors ANOVA followed by post hoc Tukey's test (α = .05) was performed for statistical analysis. RESULTS: The k-factors ANOVA test showed a significant effect of resin material, post-polymerization time, and printing orientation on translucency (p < 0.001). In comparison to HP, all 3D-printed resins showed lower translucency with all post-polymerization times and printing orientation (p < 0.001) except FormLabs resin (p > 0.05). For all 3D-printed resins, the translucency increased, with increasing the post-polymerization time (p < 0.001) and 60- and 90-min showed the highest translucency. For printing orientation, 90 and 45 degrees significantly showed high translucency in comparison to 0 degrees (p < 0.001). FormLabs showed significantly higher translucency when compared with NextDent and ASIGA per respective printing orientation and post-polymerization time. The translucency significantly decreased after thermal cycling for all tested resins (p < 0.001). CONCLUSION: The findings of this study demonstrated that the translucency of 3D-printed resins is influenced by the printing orientation, post-polymerization time, and resin type. As a result, choosing a resin type, and printing orientation, with a longer post-polymerization time should be considered since it may improve the esthetic appearance of the 3D-printed resins.
ABSTRACT
INTRODUCTION: This study aimed to evaluate denture care and hygiene and oral health-related quality of life (OHRQoL) among complete denture (CD) wearers in the Eastern Province of Saudi Arabia. METHODOLOGY: This cross-sectional study was conducted on CD wearers in the Eastern Province of Saudi Arabia. A pre-tested questionnaire was administered among study participants. Questionnaire was divided in three sections: (1) patients' demographic data, (2) awareness and maintenance of CD and (3) OHRQoL. Independent sample t-test and one-way ANOVA test were performed. RESULTS: The study included data of 300 participants with 71% of males and 28% of females. Majority of participants (82.7%) cleaned CD daily, removed CD while sleeping (88.0%) and knew that unhygienic dentures can cause oral infection (92.7%). Only 19.3% used denture cleansing tables, 41% used toothpaste, and 60.7% rinsed CD with water. Regarding OHIP-DENT domains, highest score was for functional limitation domain (2.20 ± 1.67) and the lowest for handicap domain (0.94 ± 1.09). The mean OHIP-DENT score of the sample was 12.02 ± 8.52. Females (p = 0.006), participants below 65 years of age (p = 0.029), non-Saudis (p = 0.042), those with university education (p = 0.030) and low monthly income (p = 0.045) and participants who visited dentist due to problem with CD (p = 0.041) demonstrated significantly higher mean OHIP-DENT score. CONCLUSION: Majority of participants demonstrated appropriate denture care behaviours because they were aware of the importance of denture care and hygiene. Female gender, age below 65 years, non-Saudi nationality, university education, low monthly income and visiting dentist due to problem were related to poor OHRQoL.
Subject(s)
Oral Health , Quality of Life , Male , Humans , Female , Aged , Cross-Sectional Studies , Saudi Arabia , Denture, CompleteABSTRACT
Objective: This bibliographic analysis was designed to review all dental publications in the Kingdom of Saudi Arabia (KSA) and evaluate the effect of international collaboration on the impact of published articles. Methods: The Web of Science (WOS) database was used to extract all related published articles in the KSA from 1982 to 2021. The keywords were connected using Boolean Operators to download related articles. Downloaded articles were screened according to the following inclusion criteria: collaboration journal category, journal discipline, number of citations, number of authors, and impact factor. After applying the inclusion criteria and excluding single-author articles, 5,689 documents were included in the final analysis. The chi-square test and two-independent samples t-test were used to determine the statistical significance between the variables. Results: A significantly higher proportion of articles with international collaboration (51.4%) were published in dental journals than those published nationally (43.3%) or within the institutional level (41.8%) (P < 0.0001). In addition, the average number of citations (9.28 ± 23.8) ranged from 0 to 749, received by an article and the impact factor of the journal in which the article was published, significantly higher in the case of internationally collaborative work compared with national or within institutional collaboration (P < 0.0001). Conclusion: International collaboration positively affected the impact factor, number of citations, and quartile rank of published articles. Moreover, the number of co-authors in different countries contributes to the international collaboration effect.
ABSTRACT
OBJECTIVE: With this cross-sectional study, we aimed to evaluate factors associated with moderate and high risk of periodontal disease (PD) progression in the Saudi population. METHODS: We reviewed 281 patients' clinical charts from predoctoral periodontal clinics at the dental teaching hospital in the College of Dentistry (COD) at Imam Abdulrahman Bin Faisal University (IAU) in Dammam, Saudi Arabia. After obtaining ethical approval, we determined the Periodontal Risk Assessment (PRA) of the included patients based on the modified criteria developed by Lang and Tonetti (2003). We used logistic regression on stratified data and divided the results into two categories (low-moderate and high risk) to assess the effect modifier for potential risk factors. We used SPSS version 22 for data analysis, and considered a P-value ≤ 0.05 to be statistically significant. RESULTS: Out of the 281 patients, 104 (37.0%) were male and 177 (63.0%) were female, with a mean age of 39.9 ± 14.0 years; 78.1% were Saudi nationals, 77% were married, and 44.6% were in the age group of 30 to 49. The PRA revealed 86 (30.5%) to represent high risk, 108 (38.3%) denoted moderate risk, and 88 (31.2%) signaled low risk for periodontitis. Logistic regression analysis showed that males were three times more likely to have high PRA (OR = 3.24) and to be married (OR = 2.77), as well as to be active smokers (OR = 8.87). The highest predictive factors of high PRA were 8 or more pockets ≥ 5 mm (OR = 29.0), those with active diabetes mellitus (DM; OR = 10.2), and those with 8 or more missing teeth (OR = 9.15). CONCLUSION: Saudi males who are married and have residual periodontal pockets, are actively diabetic, and with missing teeth are at high risk of PD. Further research is needed with a larger sample size comparing the general population with and without PD.
ABSTRACT
OBJECTIVE: To evaluate the quality of life (QOL) of dental professionals in the Eastern Province of Saudi Arabia. METHODS: This cross-sectional study recruited dental professionals (general dentists, specialists, and consultants) from public and private sectors in the Eastern Province of Saudi Arabia. The World Health Organization's QOL Assessment-BREF (WHOQOL-BREF) questionnaire was administered among study participants. The questionnaire addresses four domains of QOL which are physical, psychological, social relationships, and environment. RESULTS: There were 313 dental professionals in the study with a mean age of 35.72 (8.58) years. The mean score of QOL in the sample was 63 (13.9) on a 0-100 scale. 75% of the participants rated their QOL as good or very good. Of four domains, the social relationship domain had the highest mean score of QOL (67.04 SD: 23.52) and the physical domain had the lowest score (59.66 SD: 14.69). There were significant differences in the QOL of consultants (66.46 SD: 12.55), specialists (65.42 SD: 12.91), and general dentists (61.06 SD: 14.18) (P 0.010). The participants with medical illness had significantly lower QOL (56.91 SD: 12.83) than those without medical illness (63.67 SD: 13.92) (P 0.01). There were significant differences in the QOL of participants with 0-10 years since graduation (61.97 SD: 14.71), 11-20 years (61.92 SD: 13.56), and more than 20 years (68.53 SD: 10.71) (P 0.009). CONCLUSION: The qualifications, medical illness, and years since graduation were important determinants of QOL among dental professionals. Measures should be taken to improve QOL of dental professionals which can enhance the quality of patient care.
